Basic Post and Beam Barn Construction from the Experts

by | Feb 14, 2013 | Construction and Maintenance

There are ranch and property owners who prefer durability and safety of their edifices over easy construction and convenient buildings. That’s because an easy-to-construct barn may have the tendency to be blown away by the weakest hurricane, and that would be a waste of money. Go ahead, follow the article, this is all about the importance of Post and Beam constructions especially in Georgia. You will also be able to pick up something on the side on how to build one yourself.

Here is a step-by-step instruction in constructing your very own barn made from quality timber frame. Of course, first of all, you have to gather all of the materials that you are going to need for your project. With everything in hand, you wouldn’t be wasting more time looking for a spare nail or hammer, because you are ready to start with your construction.

Step one: you’ll first have to plan out your basic bents. This is otherwise called the barn’s frame. Starting with the bents is one of the simplest things to do. Decide which of the timbers you should arrange where by consulting your plans. Use a forklift to assemble all of the timber in your foundation as you follow what’s in the plans. Don’t forget to lay them out on a flat surface, and attach them together using quality steel plates or metal bolts.

Next, you need to raise your bents. This can be done easily by a telescoping forklift in order to lift the bents and bring them to the right location according to your plans. Use 2×6 braces and nail them to the posts. Make sure that they are anchored firmly to the ground or in any foundation that you have. Once again, fix them firmly in place with the use of foundation bolts and brackets.

The third step is tying the bents using 3×6 purlins and 2×6 girts. In order to nail them properly in place, use at least 16 penny nails. This way, the framework of the barn will be secure even as you work on raising and moving the bents.

Then there’s the roof sheathing. To put them in place, prepare 8 penny ring shank nails or even more, or you can also use 3-inch deck screws. The work would be made easier if you use a powerful air framing nail-gun. They can secure the nails in place firmly without doing all the noisy pounding typical of nail and hammer work. After you have built the foundation of your barn, it’s now time to piece together materials that will fortify your barn. Use asphalt, concrete, galvanized iron sheets, or any material of your choice. This time, you can talk to professionals for ideas on what to use as materials for your barn. Using Post and Beam in Georgia like those barns for your own construction is a stepping stone to making a long-lasting and sturdy edifice. Have fun building your barn!




Recent Posts



Related Posts